Department: Circulation
Procedure: Resetting the ASRS Server
Purpose: To return the ASRS to service when the servers go down.
Overview: Resetting the ASRS Server to restore two way communication between the ILS and ASRS systems.
Required Knowledge/Skills: Basic knowledge of the Dematic interface and Millennium Telnet, and personal initials and password.
Safety Issues/Precautions: None
Equipment/Supplies: None
Procedure
1. Open up the Millennium toolbar and choose the Telnet icon(computer)
2. Type the following
3. “v” for VT 100
4. “y” for yes
5. “a” for additional System functions
6. “r” for Restart a Terminal
7. Enter your initials
8. Hit “enter
9. Enter your password
10. Hit “enter”
11. “f” for forward until you find the number for “ASRS Server”(this will change every time you go through this process)
12. Enter the number for the ASRS Terminal
13. Contact the IT System Administrator in charge of the ASRS Server. Monday –Friday 8-5(Currently this is Kevin Ledbetter x6191)
14. Let the administrator know that you need to reset the server. At this time they will start the server reset on their end.
| Panel |
|---|
They will let you know when to go to the next step. |
15. “y” when you are asked if you are sure
16. Space bar to continue
17. Go back to the ASRS Computers and log in to the EMS Control Center as Administrator. Username: Admin(case sensitive) No
password
18. Go to the Startup-Shutdown tab and click on shutdown at the bottom of the page.
19. Once the system has shut down (cogs on left side of the screen will turn grey) click on Start up at the bottom of the screen to restart the system.
20. Call FM to have someone come out and reset the system in the pit.