...
| Note |
|---|
This method uses Wireless Enterprise Security that some older devices may not support. If you have a device that does not support this method then you can register the device and use the valpo-media wireless. |
| Anchor | ||||
|---|---|---|---|---|
|
- Connect to the valpo-user wireless network.
- A prompt for username and password will come up.
- Enter your ValpoNet username (e.g. jdoe1) and password.
- A prompt for accepting a security certificate will pop up. You need to accept it to continue.
- You should be connected and working on the valpo-user secure wireless network.
| Anchor | ||||
|---|---|---|---|---|
|
- Connect to the valpo-user wireless network.
- A prompt for accepting a security certificate will pop up. You need to fill it out and accept it to continue.
- The EAP, PHASE 2 Authorization, and Domain should look the same as above. You must enter valpo.edu in the "Domain" field in order to connect properly.
- Enter your ValpoNet username (e.g. jdoe1) and password.
- You should now be connected with full internet access on the valpo-user secure wireless network.
Connecting through Windows 10
...
- Connect to the valpo-user wireless network.
- A prompt will come up requesting EAP Method and Phase 2 Authentication. Select PEAP and MSCHAPv2
- Fill out the "Identity" portion with your domain username and the "Password" portion with your standard ValpoNet password.
...
- Connect to the valpo-user wireless network.
A prompt for accepting a security certificate will pop up. You need to fill it out and accept it to continue.
The EAP, PHASE 2 Authorization, and Domain should look the same as above. You must enter valpo.edu in the "Domain" field in order to connect properly.
Enter your ValpoNet username (e.g. jdoe1) and password.
You should now be connected with full internet access on the valpo-user secure wireless network.
| Anchor | ||||
|---|---|---|---|---|
|
...